Interface Configuration
7750 SR Interface Configuration Guide Page 355
hybrid-buffer-allocation
Syntax hybrid-buffer-allocation
Context config>port
Description This command enables the context for configuring hybrid port buffer allocation parameters.
Alarm Description
loc
Loss of lock
los
Loss of signal transitions on the data
lof
Loss of OTU framing
lom
Loss of Multi-frame
otu-ais
OTU Alarm Indication Signal (all 1s, overwrites all OTU overhead, even
framing bytes)
otu-ber-sf
SM Signal Fail (based on BPI8)
otu-ber-sd
SM Signal Degrade (based on BPI8)
otu-bdi
SM Backward defect indication
otu-tim
SM Trace Id Mismatch
otu-iae
SM Incoming Alignment Error
otu-biae
SM Backward Incoming Alignment Error
fec-sf
Signal Fail (based on FEC corrected bits)
fec-sd
Signal Degrade (based on FEC corrected bits)
fec-fail
FEC Mode mismatch (EFEC-GFEC) or High Uncorrectable rate (>10E-2)
fec-uncorr
One or More Uncorrectable FEC errors
odu-ais
ODU Alarm Indication Signal
odu-oci
ODU Open connection Indication
odu-lck
ODU Locked
odu-bdi
PM Backward Defect indication
odu-tim
PM Trace Id Mismatch
opu-tim
OPU PSI Trace Mismatch
opu-plm
OPU PSI Payload Type Mismatch
To Next Page
Loading...
