Alcatel-Lucent 7750 - Page 207

Interface Configuration
7750 SR Interface Configuration Guide Page 207
Verify the MDA Type
To make sure you have a channel-capable MDA, verify the MDA-type you are configuring by
entering a show mda slot-id command.
The MDAs displayed in the MDA Provisioned column in the following output are a 12-port
channelized DS3 MDA (m12-ds3) on card 1, MDA slot 1, and a 1-port channelized OC12-SFP
MDA (m1-choc12-sfp) on card 1, MDA slot 2.
A:ALA-A# show mda 1
===============================================================================
MDA 1/1
===============================================================================
Slot Mda Provisioned Equipped Admin Operational
Mda-type Mda-type State State
-------------------------------------------------------------------------------
1 1 m12-ds3 m12-ds3 up provisioned
===============================================================================
ALA-A# show mda 2
===============================================================================
MDA 1/2
===============================================================================
Slot Mda Provisioned Equipped Admin Operational
Mda-type Mda-type State State
-------------------------------------------------------------------------------
1 2 m1-choc12-sfp m1-choc12-sfp up provisioned
===============================================================================
A:ALA-A#