Alcatel-Lucent 7750 - Page 216

Interfaces
Page 216 7750 SR Interface Configuration Guide
In the TDM E1 context, configure DS0 channel groups and their parameters. For a DS1 channel-
group, up to 24 timeslots can be assigned (numbered 1— 24). For an E1 channel-group, up to 31
timeslots can be assigned (numbered 2 — 32). For ATM, all timeslots are auto-configured when a
channel group gets created (there is no sub-E1 for ATM). ATM, Frame Relay and BCP-NULL
encapsulation examples follow:
A:ALA-A>config>port>tdm# e1 1.1
A:ALA-A>config>port>tdm>e1# channel-group 1
A:ALA-A>config>port>tdm>e1>channel-group# timeslots 2
A:ALA-A>config>port>tdm>e1>channel-group# no shutdown
A:ALA-A>config>port>tdm>e1>channel-group#
A:ALA-A>config>port>tdm>e1# no shutdown
A:ALA-A>config>port>tdm>e1# channel-group 2
A:ALA-A>config>port>tdm>e1>channel-group# timeslots 3
A:ALA-A>config>port>tdm>e1>channel-group# encap-type frame-relay
A:ALA-A>config>port>tdm>e1>channel-group# no shutdown
A:ALA-A>config>port>tdm>e1>channel-group# exit
A:ALA-A>config>port>tdm>e1# channel-group 3
A:ALA-A>config>port>tdm>e1>channel-group# timeslots 11,12
A:ALA-A>config>port>tdm>e1>channel-group# encap-type cisco-hdlc
A:ALA-A>config>port>tdm>e1>channel-group# no shutdown
A:ALA-A>config>port>tdm>e1>channel-group# exit
A:ALA-A>config>port>tdm>e1# no shutdown
A:ALA-A>config>port>tdm>e1# exit
A:ALA-A>config>port>tdm# e1 1.2
A:ALA-A>config>port>tdm>e1# no shutdown
A:ALA-A>config>port>tdm>e1# channel-group 1
A:ALA-A>config>port>tdm>e1>channel-group# encap-type atm
A:ALA-A>config>port>tdm>e1>channel-group# no shutdown
A:ALA-A>config>port>tdm>e1>channel-group# exit
A:ALA-A>config>port>tdm>e1# no shutdown
A:ALA-A>config>port>tdm# info
----------------------------------------------
tdm
ds3 1
channelized e1
no shutdown
exit
e1 1.1
channel-group 1
timeslots 2
no shutdown
exit
channel-group 2
encap-type frame-relay
frame-relay
exit
timeslots 10
no shutdown
exit
channel-group 3
encap-type cisco-hdlc
cisco-hdlc
exit
timeslots 11,12
no shutdown
exit
no shutdown