Alcatel-Lucent 7750 - Page 361

Interface Configuration
7750 SR Interface Configuration Guide Page 361
elmi
Syntax elmi
Context config>port>ethernet
Description This command configures Ethernet Local Management Interface (E-LMI)parameters for the Ethernet port.
E-LMI is only supported on Ethernet access ports with Dot1q encapsulation type.
mode
Syntax mode {none | uni-n}
Context config>port>ethernet>elmi
Description This command configures the the Ethernet LMI mode.
Default none
Parameters none — Specifies that theE LMI mode is set to none.
uni-n — Specifies that theE LMI mode is set to uni-n.
n393
Syntax n393 [2..10]
no n393
Context config>port>ethernet>elmi
Description This command configures the monitored count of consecutive errors.
Parameters 2 .. 10 — Specifies the monitored count of consecutive errors.
t391
Syntax t391 [5..30]
no t391
Context config>port>ethernet>elmi
Description This command configures the polling timer for UNI-C.
Parameters 5 ..30 — Specifies the polling timer for UNI-C.