Interfaces
Page 366 7750 SR Interface Configuration Guide
config>port>tdm>e3 512 — 9208
config>port>tdm>e1>channel-group512 — 9208
network
Syntax network
Context config>port>tdm>ds1>channel-group
config>port>tdm>e1>channel-group
Description This command enables the context to configure network channel group parameters.
queue-policy
Syntax queue-policy name
no queue-policy
Context config>port>tdm>ds1>channel-group>network
config>port>tdm>e1>channel-group>network
Description This command specifies an existing network policy to apply to the channel group.
queue-policy
Syntax queue-policy name
no queue-policy
Context config>card>mda>network>ingress
config>port>sonet-sdh>path>network
Description This command specifies the network-queue policy which defines queue parameters such as CBS, high prior-
ity only burst size, MBS, CIR and PIR rates, as well as forwarding-class to queue mappings. The network-
queue policy is defined in the config>qos>network-queue context.
Default default
Parameters name — Specifies an existing network-queue policy name.
ppp
Syntax ppp
Context config>port>sonet-sdh>path
config>port>tdm>ds1>channel-group
To Next Page
Loading...
