EasyManua.ls Logo

Alcatel-Lucent 7750 - Page 382

Alcatel-Lucent 7750
788 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Interfaces
Page 382 7750 SR Interface Configuration Guide
A port queue group cannot be removed from the port when a forwarding class is currently redirected to the
group. All forwarding class redirections must first be removed prior to removing the queue group.
Default none
Parameters group-name — The group-name parameter is required when executing the port queue-group command. The
specified group-name must exist as an ingress or egress queue group template depending on the ingress
or egress context of the port queue group. Only a single queue group may be created on an ingress port.
Multiple queue groups may be created on an egress port.
instance-id — specifies the identification of a specific instance of the queue-group.
Values 1 — 40960
create — Keyword used to associate the queue group. The create keyword requirement can be enabled/
disabled in the environment>create context.
agg-rate
Syntax [no] agg-rate
Context config>port>ethernet>access>egr>qgrp
config>port>ethernet>access>egr>vport
config>port>ethernet>network>egr>qgrp
Description This command is used to control an HQoS aggregate rate limit. It is used in conjunction with the following
parameter commands: rate, limit-unused-bandwidth, and queue-frame-based-accounting.
When specified under a VPORT, the agg-rate rate, port-scheduler-policy and scheduler-policy commands
are mutually exclusive. Changing between the use of a scheduler policy and the use of an agg-rate/port-
scheduler-policy involves removing the existing command and applying the new command.
rate
Syntax rate {max | rate}
no rate
Context config>port>ethernet>access>egr>qgrp>agg-rate
config>port>ethernet>access>egr>vport>agg-rate
config>port>ethernet>network>egr>qgrp>agg-rate
Description
This command defines the enforced aggregate rate for all queues associated with the agg-rate
context. A rate must be specified for the agg-rate context to be considered to be active on the con-
text’s object (SAP, subscriber, VPORT etc.).
Parameters rateSpecifies the rate limit for the VPORT.
Values max, 1— 800000000, max

Table of Contents

Other manuals for Alcatel-Lucent 7750

Related product manuals