Interface Configuration
7750 SR Interface Configuration Guide Page 413
hsmda-scheduler-overrides
Syntax [no] hsmda-scheduler-overrides
Context config>port>ethernet
Description This command enables the context to configure ingress and egress HSMDA scheduler override parameters.
Executing hsmda-scheduler-override places the current CLI context into the egress scheduler override node
either at the ingress MDA or egress port level.
Default values are:
Values Command Configuration
description no description
max-rate no max-rate
group group 1 rate max
group 2 rate max
scheduling-class scheduling-class 1 rate max
scheduling-class 2 rate max
scheduling-class 3 rate max
scheduling-class 4 rate max
scheduling-class 5 rate max
scheduling-class 6 rate max
scheduling-class 7 rate max
scheduling-class 8 rate max
The no form of the command removes the overridden parameters from the HSMDA egress port or
ingress MDA scheduler. Once existing overrides are removed, the scheduler reverts all scheduling
parameters back to the parameters defined on the hsmda-scheduler-policy associated with the egress
port or ingress MDA.
group
Syntax group group-id rate rate
no group group-id
Context config>port>ethernet>hsmda
Description This command changes the maximum rate allowed for a weighted scheduling group on the local HSMDA
scheduler. Scheduling classes within the group are managed with an aggregate rate limit when either an
explicit group rate is defined on the HSMDA scheduling policy or a local override is defined based on the
group override command.
The no form of the command removes the local overrides for the weighted scheduling group. Once
removed, the defined behavior within the HSMDA scheduling policy for the weighted scheduling group is
used.
Parameters group-id — Identifies the two weighted scheduling groups to be overridden.
Values 1, 2
rate — The megabits-per-second parameter specifies a local limit on the total bandwidth for the weighted
To Next Page
Loading...
