Alcatel-Lucent 7750 - Page 607

Interface Configuration
7750 SR Interface Configuration Guide Page 607
Protocol Oper Status Active Links Up Time
-------------------------------------------------------------------------------
ipcp up 2 0d 00:15:04
ipv6cp none 0 N/A
mplscp waiting 0 N/A
osicp none 0 N/A
-------------------------------------------------------------------------------
Port 1/5/2.2 Information
-------------------------------------------------------------------------------
Protocol Oper Status Up Time
-------------------------------------------------------------------------------
ipcp up 0d 00:15:05
ipv6cp none N/A
mplscp running N/A
osicp none N/A
-------------------------------------------------------------------------------
Port 1/5/2.3 Information
-------------------------------------------------------------------------------
Protocol Oper Status Up Time
-------------------------------------------------------------------------------
ipcp up 0d 00:15:05
ipv6cp none N/A
mplscp running N/A
osicp none N/A
===============================================================================
A:ALU-27#
mcm
Syntax mcm [slot [/mcm]] [detail]
Context show
Description This command displays MCM information.
If no command line options are specified, a summary output of all MCMs is displayed in table format.
Parameters slot — The slot number for which to display MCM information.
Values 1
mcm — The MCM number in the slot for which to display MCM information.
Values 7750 SR-c4 — 1, 3 7750 SR-c12 — 1, 3, 5, 7, 9, 11
detail — Displays detailed MDA information.
Output MDA Output — The following table describes MDA output fields.
Label Description
Slot
The chassis slot number.
MCM The MCM slot number.