Alcatel-Lucent 7750 - Page 631

Interface Configuration
7750 SR Interface Configuration Guide Page 631
Port Show Commands
port
Syntax port port-id [count] [detail]
port port-id description
port port-id associations
port port-id atm connections
port port-id atm cp
port port-id atm ilmi
port port-id atm port-connection [detail]
port port-id atm pvc [vpi[/vci]] [detail]
port port-id atm pvp [vpi] [detail]
port port-id atm pvt [vpi-range] [detail]
port port-id cisco-hdlc
port port-id monitor-threshold
port port-id ppp [detail]
port port-id queue-group [ingress|egress] [queue-group-name] [access|network]
[{statistics|associations}]
port port-id queue-group qgrp-id [instance instance-id] queue-depth [queue queue-id]
[ingress|egress] [access|network]
port port-id mlfr-link [detail]port port-id otu [detail]
port port-id frame-relay [detail]
port aps [detail]
port cem
port port-id ethernet [[efm-oam [event-logs {failure|degraded} {active|cleared}] | detailed]
port port-id dot1x [detail]
port port-id vport [vport-name] associations
port port-id vport [vport-name] monitor-threshold
Context show
Description This command displays port or channel information.
If no command line options are specified, the command port displays summary information for all ports on
provisioned MDAs.
Parameters port-id — Specifies the physical port ID in the form slot/mda/port.
Syntax port-id slot[/mda[/port]] or
slot/mda/port[.channel]
aps-id aps-group-id[.channel]
aps keyword
group-id 1 — 64