Alcatel-Lucent 7750 - Page 650

Interfaces
Page 650 7750 SR Interface Configuration Guide
DDM Events
Enabled — DDM events are enabled
Disabled — DDM events are disabled
Configured Mode
network — The port is configured for transport network use.
access — The port is configured for service access.
Network Qos Pol
The QoS policy ID applied to the port.
Access Egr. Qos Specifies the access egress policy or that the default policy 1 is in use.
Egr. Sched. Pol Specifies the port scheduler policy or that the default policy default is
in use.
Encap Type
Null — Ingress frames will not use any tags or labels to delineate a
service.
dot1q — Ingress frames carry 802.1Q tags where each tag signifies
a different service.
Active Alarms
The number of alarms outstanding on this port.
Auto-negotiate
True — The link attempts to automatically negotiate the link speed
and duplex parameters.
False — The duplex and speed values are used for the link.
Alarm State
The current alarm state of the port.
Collect Stats
Enabled — The collection of accounting and statistical data for the
network Ethernet port is enabled. When applying accounting policies
the data by default will be collected in the appropriate records and
written to the designated billing file.
Disabled — Collection is disabled. Statistics are still accumulated
by the IOM cards, however, the CPU will not obtain the results and
write them to the billing file.
Down-When-Looped
Shows whether the feature is enabled or disabled.
Egress Rate
The maximum amount of egress bandwidth (in kilobits per second)
that this Ethernet interface can generate.
Egress Buf (Acc)
The access-buffer policy for the egress buffer.
Egress Buf (Net)
The network-buffer policy for the egress buffer.
Egress Pool Size
The amount of egress buffer space, expressed as a percentage of the
available buffer space that will be allocated to the port or channel for
egress buffering.
Ingress Buf
(Acc)
The access-buffer policy for the ingress buffer.
Label Description (Continued)