Interface Configuration
7750 SR Interface Configuration Guide Page 699
A:ALA-48>config#
redundancy
Syntax redundancy
Context show
Description This command enables the context to show multi-chassis redundancy information.
multi-chassis
Syntax multi-chassis all
mult-chassis mc-lag peer ip-address [lag lag-id]
mult-chassis mc-lag [peer ip-address [lag lag-id]] statistics
mult-chassis sync [peer ip-address] [detail]
mult-chassis sync [peer ip-address] statistics
Context show>redundancy
Description This command displays multi-chassis redundancy information.
Parameters all — Displays all multi-chassis information.
mc-lag — Displays multi-chassis LAG information.
peer ip-address — Displays the address of the multi-chassis peer.
lag lag-id — Displays the specified LAG ID on this system that forms an multi-chassis LAG configuration
with the indicated peer.
statistics — Displays statistics for the multi-chassis peer.
sync — Displays synchronization information.
detail — Displays detailed information.
Sample Output
A:pc1# show redundancy multi-chassis all
===============================================================================
Multi-Chassis Peers
===============================================================================
Peer IP Src IP Auth Peer Admin
MCS Admin MCS Oper MCS State MC-LAG Admin MC-LAG Oper
-------------------------------------------------------------------------------
10.10.10.102 10.10.10.101 hash Enabled
Enabled Enabled inSync Enabled Enabled
10.10.20.1 0.0.0.0 None Disabled
-- -- -- Disabled Disabled
===============================================================================
To Next Page
Loading...
