Interface Configuration
7750 SR Interface Configuration Guide Page 715
Label Description
Type
Specifies the type of this multilink bundle.
mlppp — Indicates that the bundle is of type MLPPP.
ima — Indicates that the bundle is of type IMA group.
Admin State
Up — The bundle is administratively up.
Down — The bundle is administratively down.
Oper State
Up — The bundle is operationally up.
Down — The bundle is operationally down.
Port State
Displays the state level of the port.
none — Indicates that the port is either in its initial creation state or
is just about to to be deleted.
ghost — No member links are configured as part of this bundle.
down — All member links are in “none”, “ghost”, or “down” state.
linkUp — At least one member link is in port state “link up” but the
bundle protocol is not yet operationally up (due to bundle protocol still
coming up. For example, due to insufficient number of member links
in “link up” state yet or to bundle being shut down.
Up — Indicates that the bundle is ready to pass some kinds of traffic
as the bundle protocol has come up (at least “minimum links” member
links are in the port state up and the bundle protocol is up.)
Min Links
Minimum Links
Displays the minimum number of links that must be active for a bundle
to be active. If the number of active links drop below the given
minimum then the multilink bundle will transition to an operation
down state.
Bundle IfIndex
Displays the bundle’s interface index number which reflects its
initialization sequence.
Total Links
Displays the total number of member links configured for this bundle.
Active Links
Displays the total number of active links for the bundle.
Description
Displays configured description for this bundle.
Bundle Id
Displays the port ID for this bundle.
Red Diff Delay
Displays the maximum acceptable differential delay for individual
circuits within this multilink bundle. If the delay exceeds this
threshold, a trap is issued. The differential delay is calculated as the
round-trip differential delay for MLPPP bundles, and as uni-directional
differential delay for IMA bundles.
To Next Page
Loading...
