Alcatel-Lucent 7750 - Page 732

Interfaces
Page 732 7750 SR Interface Configuration Guide
Sample Output
A:ima2# show multilink-bundle bundle-ima-1/1.1 ima atm pvp
================================================================
ATM PVPs, Port bundle-ima-1/1.1
================================================================
VPI Owner Type Ing.TD Egr.TD Adm OAM Opr
----------------------------------------------------------------
2 SAP PVP 1 1 up up up
================================================================
A:ima2#
pvt
Syntax pvt [vpi.vpi] [detail]
Context show>multilink-bundle>ima>atm
Description This command displays ATM port PVT information.
Parameters vpi — Displays the VPI values.
Values vpi: 0 — 4095 (NNI)
0 — 255 (UNI)
detail — Provides detailed information.
MDA Values 1, 2
ima — Indicates that the bundle is of type IMA group.
Ing.TD
Specifies the ATM traffic descriptor profile that applies to the receive
direction of the interface connection.
Eng.TD
Specifies the ATM traffic descriptor profile that applies to the transmit
direction of the interface connection.
Adm
ima — Indicates that the bundle is of type IMA group.
Down — The bundle is administratively down.
OAM
Indicates the OAM operational status of ATM connections.
Opr
Up — The bundle is operationally up.
Down — The bundle is operationally down.
Label Description (Continued)