Interfaces
Page 746 7750 SR Interface Configuration Guide
Monitor Commands
card
Syntax card slot-number fp fp-number ingress {access|network} queue-group queue-group-name
instance instance-id [absolute] [interval seconds] [repeat repeat] policer policer-id
Context monitor
Description This command monitors card parameters.
port
Syntax port port-id [port-id...(up to 5 max)] [interval seconds] [repeat repeat] [absolute | rate]
[multiclass]
Context monitor
Description This command enables port traffic monitoring. The specified port(s) statistical information displays at the
configured interval until the configured count is reached.
The first screen displays the current statistics related to the specified port(s). The subsequent statistical
information listed for each interval is displayed as a delta to the previous display.
When the keyword rate is specified, the "rate per second" for each statistic is displayed instead of the delta.
Monitor commands are similar to show commands but only statistical information displays. Monitor
commands display the selected statistics according to the configured number of times at the interval
specified.
Parameters port port-id — Specify up to 5 port IDs. Port-IDs are only MLPPP bundles or bundle protection groups
when the multiclass keyword is specified.
Syntax: port-id slot/mda/port[.channel]
aps-id aps-group-id[.channel]
aps keyword
group-id 1 — 64 (16 for 7750 SR-c12/4)
bundle IDbundle-type-slot/mda.bundle-num
bpgrp-type-bpgrp-num
bundle keyword
bundle-num 1 — 128 (16 for 7750 SR-c12/4)
type ima, ppp
interval seconds — Configures the interval for each display in seconds.
Default 10 seconds
Values 3 — 60
repeat repeat — Configures how many times the command is repeated.
To Next Page
Loading...
