Alcatel-Lucent 7750 - Page 766

Interfaces
Page 766 7750 SR Interface Configuration Guide
ima
Syntax ima
Context tools>perform
Description This command allows the use of IMA operations.
reset
Syntax reset bundle-id
Context tools>perform>ima
Description This command sets an IMA-bundle to the Start Up state.
Parameters bundle-id — Specifies an existing bundle ID.
Values bundle-ima-slot/mda.bundle-num
bundle-num — Specifies the bundle number.
Values 1 — 256
lag
Syntax lag
Context tools>perform
Description This command provides tools for controlling LAG.
clear-force
Syntax clear-force all-mc
clear-force lag-id lag-id [sub-group sub-group-id]
clear-force peer-mc ip-address
Context tools>perform>lag
Description This command clears forced status.
Parameters all-mc —
lag-id lag-id — Specifies the LAG ID.
Values 1 — 800
sub-group sub-group-id — Specifies the subscriber group ID.
Values 1 — 16