The call will start after a timeout of approx. 10 seconds if there is no action taken after dialling.
Making a peer to peer SIP call
Your phone is compatible with the peer to peer SIP call. It is able to call phones connected to the same local
network. You can call your contact by entering the IP address of your contact's deskphone.
Make the call with the headset if connected, or in hands-free mode.
In case of multi-SIP accounts configured on your phone, first select the SIP account to use to make the call if
you don’t want to use the main account for this call.
• Enter the IP address of your contact's deskphone (IPv4). The format of the entered IP address
must be x.x.x.x or x*x*x*x where x is a decimal value between 0 and 255.
• Use one of the following:
o Press the OK key to start the call.
o Press the call key.
o or Press the call icon key.
This feature is useful when you have no connection to a communication server (no registration, network
problems, etc.). Not all the features are available should this occur and the phone's status should be displayed on
the screen. This feature can be deactivated by your administrator.
Calling by name
You can call a contact by his/her name using the search feature in the company directory.
This feature depends on the system configuration. If necessary, contact your administrator.
You can unhook the handset or the headset to make a call with the handset or the headset otherwise you make a
call in hands-free mode.
Use the alpha-numeric keyboard key to switch between the numeric and alphabetic keyboard.
• Use one of the following:
o If only one SIP account is configured on your phone or if you want to make a call with the
main SIP account, enter the first letters of your contact’s name directly.
o Select the SIP account to use to make the call. A dial area and the list of last numbers dialed
are displayed. Enter the first letters of your contact's name.
• All matching names are displayed on the screen (if necessary scroll through the pages to display
additional matching names).
• or Call the contact by pressing the call icon key the call is started.
You can also call your contact from the contact card (Call).
To Next Page
Loading...
