Alcatel-Lucent 8068s - Led Description; Icons Displayed on the Screen; Battery Charge; Turning off and on

Alcatel-Lucent Cloud Edition
DeskPhone
8AL90362ENRB ed01
66 /86
7
Button for pairing Bluetooth®.
8
LED (LEDs on all sides)
8.2.3 LED description
• Steady yellow: the device is switched on.
• Blue steady: connected through Bluetooth®.
• Green steady: microphone is enabled/call in progress (Bluetooth®).
• Flashing green: incoming call (Bluetooth®).
• Flashing blue: pairing or connecting in progress (Bluetooth®).
• Red steady: microphone switched off during calls (mute).
• Flashing red: Low battery.
• Flashing slowly: the call is placed on hold (Bluetooth®).
8.2.4 Icons displayed on the screen
The icons are normally displayed for a couple of seconds on connection. The same symbol is displayed in red
when the connection is broken.
USB device connected.
Incoming call or call in progress via
Bluetooth®.
Incoming call or call in progress via USB.
Music mode via Bluetooth®.
Music mode via USB.
Headset connected.
Visible for pairing via Bluetooth®.
Volume adjustment (number of bars
indicates the volume selected).
Reconnecting to Bluetooth® device.
Microphone switched off (mute).
Bluetooth® device connected.
Battery status.
8.2.5 Battery charge
Displayed automatically when there is 1 hour remaining and then every 5 minutes. The number of
bars in the battery icon indicates the charging status. The battery needs charging when the icon turns
red. Charging the battery with a USB cable.
8.2.6 Turning off and on
The 8105s EGO starts automatically when it is connected with the provided USB cable to the deskphone or
powered-up computer.
• Push the button to start the device manually.
• Hold down the button for five seconds to manually switch off.
8.2.7 Connect the device to the deskphone using the USB cable