Alcatel-Lucent Cloud Edition
DeskPhone
Connect a 3 pole jack headset
Your phone is equipped with a 3.5 mm, 4 pole jack. If your headset is not compatible (3 pole jack), you have to
use adapters.
Use the following kit which contains a 3 pole to 4 pole jack adapter and a RJ11 to SATA adapter:
• 80XX JACK 4-3 POLE CABLE (box of 10) 3MG08018AA
• 80x8S SATA-RJ11 CABLE (box of 10) 3MG08019AA
A 3 pole to 4 pole jack adapter to connect the jack of the
headset to the DeskPhone to manage audio.
RJ11 to SATA adapter to connect the RJ11 connector of
the headset to the SATA connector to the DeskPhone to
manage ringing. Some manufacturers provide the Sata
connector. In this case, the adapter is not useful.
EHS adapter (depends on accessory manufacturer).
To Next Page
Loading...
