Alcatel-Lucent 8068s - USB External Ringing Interface Module

Alcatel-Lucent Cloud Edition
DeskPhone
8AL90362ENRB ed01
69 /86
USB external ringing interface module (USB Interface module 2 relays
3GV28184AA)
8068s CE
8058s CE
8018 CE
8008/8008G CE
The accessory is supported by the following
sets
The USB external ringing interface module allows driving an external system (like a ring or a lamp), following the
ring tone cadence or the communication state of the phone connected on the telephone line. No system
configuration is requested to install the module.
USB Interface module 2 relays lets to connect directly one or 2 external ringings on the USB connector of your
deskphone:
Relay 2
The phone is in audio communication.
The relay is active as long as the phone is
in communication.
Relay 1
The phone is ringing. The relay follows
exactly the ring signal.
List of supplies
• USB external ringing interface module.
• 1 USB cable 1,5 m (4,9 feet) USB type A - USB type B.
8.3.1 Installation
WARNING: The module must be closed before use. No settings require the module to be open.
In idle state:
Ringing or during
communication:
N: Common.
NC: active signal.
NO: non-active signal.
Typical usage diagram:
Phase
Neutral
The lamp lights up when the phone is in communication.
The breaking capacity is 12V/24V DC 15A or 120V/220V AC at 10A.