Alcatel-Lucent Cloud Edition
DeskPhone
8.5.2 8018 Cloud Edition DeskPhone
1. Drill two holes on the wall
(separation=90mm, diameter=6mm).
2. Insert the fastener into the holes on wall
(P/N: 1AD007550003).
3. Fix the support with both screws and
adjust (P/N: 1 1AD007460003). The
support is used as a reference and must
be removeable.
1. Put the support on the back side of the phone.
2. Slide it from top side and make sure the 2 snaps
are engaged on the shell.
1. Fix the support with the phone by 1
screw (P/N: 1AD204430001).
2. Connect cables through the hole on
support bottom side.
1. Hang the assembled phone with support on the
wall (P/N: 1AB045210162).
If your phone is equipped with the reversible
hook (beginning of 2020), improve the stability of
the handset (for example on boats) by turning
the hook on the phone as shown in the following
picture:
To Next Page
Loading...
