If necessary, you can also select the accessory type in the audio settings:
• Select the settings icon from the phone menu (see the navigation section of your phone model).
• Phone Audio USB
• Select the type of device connected to the USB: Headset / Handsfree / Loudspeaker
•
Install a RJ9 headset (8008G CE, 8008 CE)
You can connect a corded headset to your phone using the RJ9 connector behind the phone. Your headset must
be compatible with the connector or an adapter must be used. Some USB or jack headsets can be used with a RJ9
adapter. Consult the list of accessories for compatible headsets: List of accessories.
Manage connected devices
6.11.1 List of connected devices
• Select the settings icon from the phone menu (see the navigation section of your phone model).
• Phone Audio
• You can find information about which device is connected to the jack or USB connector.
o USB: None / Headset / Handsfree / Loudspeaker
o Jack: None / Headset / Handsfree / Loudspeaker
o Bluetooth: None / Headset / Handsfree / Loudspeaker
6.11.2 Set accessory type for each connector
• Select the settings icon from the phone menu (see the navigation section of your phone model).
• Phone Audio
• Use one of the following:
o USB:
Select the type of device connected to the USB: Headset / Handsfree / Loudspeaker
o Jack:
Select the type of device plugged into the jack: Headset / Handsfree / Loudspeaker
o Bluetooth (compatible Bluetooth® deskphone):
Select the type of device paired with your phone: Headset / Handsfree / Loudspeaker
•
6.11.3 Default device
If you have connected the same type of accessory in the jack and the USB connectors, you can define which
device will be used by default.
• Select the settings icon from the phone menu (see the navigation section of your phone model).
• Phone Audio
• Accessory type
• Select the default connector (then the accessory) to be used: None / Jack / USB / Bluetooth (compatible
Bluetooth® deskphone).
To Next Page
Loading...
