Alcatel-Lucent 8068s - Wall Mounting Kit

Alcatel-Lucent Cloud Edition
DeskPhone
8AL90362ENRB ed01
73 /86
Wall mounting kit
8.5.1 8068s, 8058s Cloud Edition Deskphone
1. Rotate the metal foot to flat.
2. Remove the rubber cover on phone back
shell each side.
1. Drill two holes on the wall (separation=90mm,
diameter=6mm).
2. Insert the fastener into the holes on wall (P/N:
1AD007550003).
3. Fix the support with both screws and adjust
(P/N: 1 1AD007460003). The support is used as a
reference and must be removeable.
1. Put the support on the back side of the phone.
2. Slide it to top side and make sure the 4 hooks
hold the metal foot.
3. Attach the magnetic alphabetic keyboard to
the metal foot.
4. Push on the two corners of mini-keyboard to
fix it in the support.
1. Fix the support with the phone by 1 screw
(P/N: 1AD100020003).
2. Connect cables through the hole on support
left side or right side.
To connect ethernet, use RJ45 cable (P/N:
1AB045210162).
To connect the power, use extension cable (P/N:
1AB203010001).
1. Hang the assembled phone with support on
the wall.