Alcatel-Lucent 8232 DECT - 7.5 Activating headset mode; 7.6 Adjusting your telephone functions

8232 DECT Handset
8AL90861USACed01
37 /56
7.5 Activating headset mode
This mode allows you to answer calls automatically (without doing anything) and to direct the call to the external
headset.
 Access MENU.
 Services
 Phoneset
 automatic answer
 Select active/inactive as you wish.
 Apply.
7.6 Adjusting your telephone functions
 Access MENU.
 Settings
 Select the function* you want and use the On/Off softkeys to activate or deactivate the function.
OR
 Select the function* you want and press the OK key to enter the function menu to configure the
function.
 Return to idle.
* *You can activate or disable the following functions:
 Status To show Handset information such as the software version, the battery level, etc.
 Ascending ringing Activate or deactivate the ascending ringtone (Progressive ringing).
 Coverage warning To activate or deactivate Bip emission when your phone is out of DECT area coverage.
 Keypad tone Activate or deactivate the keypad tone.
 Charger warning To activate or deactivate Bip emission when placing handset on charger.
 Low bat. warning To activate or deactivate Bip emission when low battery level is reached.
 Headset mode Activate or deactivate the headset mode. When activated only the headset rings (if plugged in).
 Economy mode Activate or deactivate the economy mode When the economy mode is activated, the set adjusts
its radio emission power according to the distance between the set and the radio base. The closer the set is to the
radio base the lower the radio emission from the phone. This means that the phone is not always emitting at full
power and thus saves the battery.