Programming your telephone
8AL90399ENAD ed01 100/141
4.23 Installing a Bluetooth® Wireless Technology headset (pairing)
This feature is available if your desk phone is equipped with the wireless module (depending on the
model of your desk phone). If it's not the case, the wireless module can be purchased separately:
ALE-108 Wireless Module. If the desk phone is locked for pairing with a new connected Bluetooth
device, this feature may not be available. For more information about comptible headsets, see
chapter: Accessories.
You can then answer a call using your Bluetooth® headset.
4.23.1 Enable Bluetooth®
You must enable Bluetooth® if it is not already activated.
•
→
Bluetooth
• Enable: Activate Bluetooth® (check the box).
• Enter password if requested by the system and confirm.
• The phone restarts.
4.23.2 Install the Bluetooth® device
Before a Bluetooth® headset can be used, it must be paired to the terminal. Before performing the
pairing operation, the headset must be in detectable mode.
Use one of the following:
•
→
Bluetooth
→
Search devices
• Reach the 'Menu' page
→
Settings
→
Phone
→
Local Menu
→
Bluetooth
→
Search devices
Searching for Bluetooth® equipment. Wait for the detected equipment type and address to be
displayed
• Select the relevant equipment.
• Add*
• Confirm
Acknowledgement message and display of the headset icon on the terminal screen.
* If a password is requested, refer to the user documentation supplied with the heaset.
To Next Page
Loading...
