Accessories
8AL90399ENAD ed01 129/141
5.7 ALE-110 Wall Mounting Kit
5.7.1 Prerequisites
To connect the desk phone to the dedicated LAN port when
the wall mounting kit is installed, the two LAN ports will
have to be switched. LAN port 1 is used to connect the desk
phone by default. LAN port 2 must be used if the wall
mounting kit is installed.
To switch the two LAN ports:
• Connect the desk phone to LAN port 1.
•
→
Settings
• Use left-right navigation keys to display user settings: Advanced.
• Network
→
Advanced
→
LAN port
• Switch ethernet ports
Confirm the Ethernet port switch: Yes.
• or Go back to the previous page (short press) or to the homepage (long press).
• Disconnect the desk phone.
5.7.2 Wall mount installation
To Next Page
Loading...
