Alcatel-Lucent ALE-500 - Connectors and Audio Encryption

Getting to know your telephone
8AL90399ENAD ed01 33/141
1.14 Connectors
1.14.1 Description of the connectors
1
Universal Serial Bus type C Power Delivery (USB-C PD) connector
(1)
.
2
10/100/1000 Mbps Ethernet connectors to a PC (RJ45). Use this port to connect your PC to your
enterprise network.
3
10/100/1000 Mbps Ethernet connectors to the enterprise network (LAN - RJ45). Use this port to
connect the desk phone to the enterprise network.
4
Wired handset connector (RJ11). Use only Alcatel-Lucent Enterprise compatible handset (ALE-
150 SWB Corded Handset).
5
Universal Serial Bus type C Power Delivery (USB-C PD) connector
(1)
.
(1)
USB connectors (Universal Serial Bus) – USB-C PD - USB type C Power Delivery.
These connectors are agnostic, meaning that you can use either connector to connect USB-C power
adapter, USB keyboard, USB headset, an audio equipment, a USB stick, a Bluetooth® USB dongle provided
with a Bluetooth® headset.This connector can be used to charge a smartphone.
USB-C PD
USB type C Power
Delivery
The USB Type C is reversible and full duplex. It is
able to transmit data or power.
1.14.2 Powering the desk phone
The phone can be powered either via a power adapter (5V/3A - sold separately) or via Power over
Ethernet (PoE). The power adapter can be connected to a USB-C connector (1 or 2).
If the phone cannot detect a 5V 3A PD power adapter, the following icon will be displayed in the
status bar at the top of the screen: . In this case, the phone will be able to reduce the amount of
power it consumes (USB current limiter, volume limiter, brightness) and therefore deliver the
required level of power to the connected devices.



 
 