Alcatel-Lucent ALE-500 - Customize the Color and the Style of Programmable Softkeys

Programming your telephone
8AL90399ENAD ed01 96/141
4.12.2 Icon description / LED description
The icons displayed depend on the system configuration. Some keys must be programmed by your
administrator. Led behavior may differ depending on the system configuration. For more
information, contact your installer or administrator.
Call icons
LED description
(ALE-300 / ALE-120)
You receive an incoming call from the programmed
contact.
Off
You are in conversation with the programmed contact.
Off
You place the programmed contact on hold.
Off
Do not disturb your programmed contact.
Steady blue
The following icons are displayed when you define a service on a programmable key.
Feature activated.
Steady blue
Feature disabled.
Off
Assistant away.
Steady blue
Supervised contact.
Off
4.13 Customize the color and the style of programmable softkeys
You can customize the color and style of the softkeys of the perso page and the add-on modules by
inserting a prefix in front of the label of the softkey.
When you program a softkey, add the prefix to the name of the softkey to customize it.
The prefix depends on the software version and are
defined as follow:
\C: color
The prefix is followed by a number between 1 and
10 which defines the color.
\B: bold.
The numbers for each color are as follows:
Use the color number 0 to go back to the default
color.
As a reminder, if you are using the alphanumeric keyboard: '\' is displayed by pressing '0'
successively, long press on '*' allows to display capital letters.
Use cases:
• SOS (Orange): \C4SOS
• SOS (Red, bold): \C3\BSOS