Programming your telephone
8AL90399ENAD ed01 102/141
4.24.2 Default device
If you have connected the same type of accessory onto different connectors (for example, one
headset to the USB connector and one Bluetooth® headset), the list of used connectors is displayed
for each type of accessory. You can select your preferred accessory to be used as the default
accessory. The most visible icon is the default device.
In the following example a USB headset and a Bluetooth® headset are connected. The default
device is the one connected to the USB connector.
• Use one of the following:
o long press
o
→
Audio
→
Devices
• The list of connected devices is displayed.
• Select the device with more than one connector icons.
• Select your preferred accessory
•
4.24.3 Information about the connected Bluetooth® device and the battery level
• The handset is connected.
•
→
Bluetooth
→
Devices
• Select the relevant device.
• Information
• Display information as the MAC address, software version, serial number and battery level.
If the battery level of the Bluetooth® device is low, the following icon will blink on and off in the
status bar at the top of the screen: .
4.25 Using a Bluetooth® Wireless Technology headset
This feature is only available when your desk phone is equipped with ALE-108 wireless module.
Otherwise the corresponding menu is not displayed or is inactive.
Refer to the user documentation supplied with the headset.
4.26 Display all paired Bluetooth® devices
This feature is only available when your desk phone is equipped with ALE-108 wireless module.
Otherwise the corresponding menu is not displayed or is inactive.
•
→
Bluetooth®
• Devices: display of the different equipment paired.
To Next Page
Loading...
