Alcatel-Lucent ALE-500 - Activate or Disable Proximity Detection; Selecting the Welcome Page; Selecting Language

Programming your telephone
8AL90399ENAD ed01 93/141
4.8.6 Set the delay before the screensaver is activated
• → Display → Screensaver
• Set the time delay (default 4 hours) –
4h/1h/30min/15min/5min/1min.
•
•
4.9 Activate or disable proximity detection
When this option is checked, the phone automatically detects when you approach it and switches to
the idle state on the homepage (screen saver off and backlight on).
• → Display → Advanced → Proximity sensor
• Activate or deactivate the feature.
• When activating proximity detection, select proximity
sensitivity: Sensitivity → Low, Mid, High.
The lower the sensitivity, the closer you have to get to wake up
your desk phone (light up the screen). It is not recommended
to set the sensitivity too high in very busy locations.
•
4.10 Selecting the welcome page
This function is used to choose the page displayed by default on the telephone.
• Reach the 'Menu' page.
• Settings → Phone → Homepage
• Enter your password (if required) and apply.
• Select the default page (Menu, Perso, Info, Last page seen…).
•
•
4.11 Selecting language
• Reach the 'Menu' page.
• Settings → Phone → Language
• Enter your password (if required) and apply.
• Select the language of your choice.
•
•