Using your telephone
8AL90399ENAD ed01 38/141
2.6 Switching between audio modes
During conversation, you can switch between different audio modes (handset, loudspeaker, hands-
free or headset, if connected) by pressing the loudspeaker/hands-free key until the desired audio
mode is displayed: . This feature depends on connected devices and the default device selected
in the phone configuration. If you have connected the same type of accessory via different
connection methods (for example, a USB headset and a Bluetooth® headset), the default device is
used for audio switching. The key is lit when the loudspeaker or hands-free mode is selected.
You are in conversation with the handset, you can switch between following audio modes by short
pressing on the loudspeaker/hands-free key:
You are in conversation with the headset (headset or headset+loudspeaker), you can switch
between following audio modes by short pressing on the loudspeaker/hands-free key:
You are in conversation with the headset and the handset is not hang-up, you can switch between
following audio modes by short pressing on the loudspeaker/hands-free key:
To switch the audio to the headset, you have to press the line key on the headset.
You are in conversation, you can switch to the loudspeaker by long pressing on the
loudspeaker/hands-free key (Group listening feature: see chapter below).
For each audio mode, during the conversation, you can adjust the volume. The number of levels
depends on the audio mode (8 for handset and headset 10 for hands-free and loudspeaker). The
selected volume, for each audio mode, will be saved for future conversations.
• During a conversation.
• Adjust the volume by using the Smart Pad (rotating clockwise or counter
clockwise).
The hands-free mode can be deactivated by the administrator.
To Next Page
Loading...
