Alcatel-Lucent ALE-500 - Making, Receiving, and Managing Calls

Using your telephone
8AL90399ENAD ed01 36/141
2.3 Making a call
Use one of the following:
• Dial the destination number. Depending on the connected device, you are in a conversation
using the connected headset, otherwise in hands-free mode.
• Unhook the handset. Dial the destination number.
• Press the line key on the headset. Dial the destination number. If your headset has no line
key, use the phone to make the call and switch on the audio on the headset ( ).
• Press the line key on the Bluetooth® device (Bluetooth® Wireless handset). Dial the
destination number.
• Hands-free. Dial the destination number.
• Programmed line key.
• Dial by name (enter the first letters of the contact's name on the alphapad and press OK to
start the search).
• Redialing from the call log.
• Redial from the last dialed numbers (long press).
• Audio Hub: use your desk phone to make a call with your mobile phone (dial the number or
select a contact from the desk phone) (see: Use your desk phone as a Bluetooth® AudioHub
with your mobile phone (hands-free mode, handset and headset)).
To make an external call, dial the outside line access code before dialing your contact number.
If the internal or outside number does not reply
• LS announce: Broadcast a message on the loudspeaker of the free terminal (internal
contacts).
• Call back: Request callback to a busy terminal.
• Text msg: Send a written message.
• Voice msg: Leave a message to the caller.
The hands-free mode can be deactivated by the administrator.