Accessories
8AL90399ENAD ed01 113/141
5.2.9.2 Activate/deactivate voice prompts
• The handset is connected.
•
→
Bluetooth
→
Devices
• Select the relevant device: “ALE-160 BT Handset”.
• Voice Prompt: check/uncheck the box to activate/deactivate the voice prompts.
•
Activate/deactivate: press simultaneously on Mute and Power keys.
5.2.10 Activate/deactivate the beep touch instead of the voice prompts
• The handset is connected.
•
→
Bluetooth
→
Devices
• Select the relevant device: “ALE-160 BT Handset”.
• Key Beeps: check/uncheck the box to activate/deactivate the key beeps.
•
5.2.11 Locate your handset
Press this key to locate your handset:
• The handset is connected.
•
→
Bluetooth
→
Devices
• Select the relevant device: “ALE-160 BT Handset”.
• Locate
• The handset is ringing and the message is displayed on the desk phone until you stop it.
• To stop: Stop
5.2.12 Remove the handset
• The handset is connected.
•
→
Bluetooth
→
Devices
• Select the relevant device: “ALE-160 BT Handset”.
• Remove
• If voice prompts are enabled, you hear: “Pairing mode, waiting for connection”. The
following message is displayed on the screen: “Device removed”.
5.2.13 Upgrade the handset
The paired Bluetooth® handset will be updated automatically if the desk phone installs a newer
firmware release for the handset. While the update is loading, the handset can be used as normal.
The progress of the update is displayed in the top bar. The handset completes its update when it is
not in use (hung up, no incoming call), by restarting and connecting to the desk phone again.
Automatic updates are available if the following option is activated: BT OTA upgrade (see: Contacting
your administrator).
To Next Page
Loading...
