H2 DeskPhone
H2P DeskPhone
8AL90394ENAAed01 11 /111
3 Safety Instructions
Please read the following safety notices before installing or using this unit. They are crucial for the safe and
reliable operation of the device.
⚫ Please use the external power supply that is included in the package. Another power source may
cause damage to the telephone and affect its behavior or induce noise.
⚫ Before using the external power supply in the package, please check the home power voltage.
Inaccurate power voltage may cause fire and damage.
⚫ Please do not damage the power cord. If the power cord or plug is impaired, do not use it because it
may cause fire or electric shock.
⚫ Do not drop, knock or shake the telephone. Rough handling can break internal circuit boards.
⚫ This telephone is designed for indoor use. Do not install the device in places where there is direct
sunlight. Also do not put the device on carpets or cushions. It may cause fire or breakdown.
⚫ Avoid exposure of the telephone to high temperatures or those below 0°C, or to high humidity.
⚫ Avoid getting the unit wet with any liquid.
⚫ Do not attempt to open it. Non-expert handling of the device could damage it. Consult your authorized
dealer for help or else it may cause fire, electric shock or breakdown.
⚫ Do not use harsh chemicals, cleaning solvents or strong detergents to clean it. Wipe it clean with a soft
cloth that has been slightly dampened in a mild soap and water solution.
⚫ Do not touch the power plug in the event of lightning as this may cause an electric shock.
⚫ Do not install this telephone in a poorly ventilated place as this could cause bodily injury. Before you
work on any equipment, be aware of the hazards involved with electrical circuitry and be familiar with
standard practices for preventing accidents.
To Next Page
Loading...
