H2 DeskPhone
H2P DeskPhone
8AL90394ENAAed01 40 /111
8.13.2 Network conference
Users need server support for network conference.
Log in to the web page, enter [Line] >> [SIP] >> [Basic settings], set the conference mode as server mode
(default is local mode), set the server conference room number (please consult your system administrator),
as shown in the figure below:
Figure 42 - Network conference
Method for joining a network conference:
⚫ Multi-party call number for a network conference room: Enter the password, and then all parties
enter the conference room.
⚫ The two telephones have established common calls. Press the conference button to invite new
members to the conference. Follow the voice prompt to operate.
Note: The upper limit of the number of participants in the network conference varies depending on the
server.
To Next Page
Loading...
