H2 DeskPhone
H2P DeskPhone
8AL90394ENAAed01 27 /111
7.7 SIP configurations
A line must be configured properly to be able to provide telephone service. The line configuration is like a
virtualized SIM card on a mobile telephone which stores the service provider and the account information
used for registration and authentication. When the device is properly configured, it will register the device to
the service provider with the server’s address and user’s authentication as stored in the configurations.
The user can configure a line on the telephone or web page interface and input the corresponding
information such as the registered address, registered user name, registered password and SIP user and
registered port, which are provided by the SIP server administrator.
⚫ Telephone interface: To manually configure a line, the user presses the button in the function menu
[Setting] >> [Admin] >> [SIP Accounts] to set up the configuration. Click OK to save the configuration.
NOTE: User must enter correct password to enter Admin interface in order to edit the SIP
configurations (default password is 123456).
The parameters and screens are listed below.
Figure 10 - Telephone line SIP address and account information
⚫ WEB interface: After logging into the telephone page, enter [Line] >> [SIP] for Register Setting, and
click Apply to complete the registration after configuration, as shown below:
Figure 11 - SIP registration in web
To Next Page
Loading...
