Alcatel-Lucent H2P DeskPhone - Advance Function; BLF (Busy Lamp Field)

H2 DeskPhone
H2P DeskPhone
8AL90394ENAAed01 46 /111
9 Advance Function
9.1 BLF (Busy Lamp Field)
9.1.1 Configure the BLF functionality
⚫ Page interface: Log in to the telephone page, enter the [Function key] >> [Function key] page,
select a DSS key, set the function key type as Memory Key, choose the subtype from among
BLF/NEW CALL, BLF/BXFER, BLF/AXFER, BLF/CONF, set the BLF/DTMF value as the number to
be subscribed, and set the corresponding SIP line. The pickup number is provided by the server.
For specific usage, refer to 8.15 Pick up.
Figure 55 - Web page configuration of BLF function key
⚫ Telephone interface: Long press a function key to enter the function key Settings interface, set the
key function types as memory keys and the subtype as BLF/NEW CALL, BLF/BXFER,
BLF/AXFER, BLF/CONF, or BLF/DTMF. The value is the subscription number. Set up the
corresponding SIP lines.
Figure 56 - Telephone configuration of BLF function key
Table 8 - BLF Function Key Subtype Parameter List
Subtype
Standby is described
Calling is described
BLF/NEW
CALL
Pressing the BLF key while in standby
to dial the subscriber number.
When you press this BLF key while talking to
another user, you create a new call along with
the subscribed number.
BLF/BXFE
R
Pressing the BLF key while in standby
to dial the subscriber number.
When you press this BLF key while talking to
another user, you blind transfer the call to the