H2 DeskPhone
H2P DeskPhone
8AL90394ENAAed01 29 /111
◼ Open audio channel then dial the number
Another alternative is the traditional way in which the user first opens the audio channel by lifting the
handset, or by pressing the hands-free button, or pressing the line key, and then dialing the number. When
completing the number, the user can press the [Dial] button or the [OK] button to call out. The number can
also be dialed out automatically after a timeout.
Figure 14 - Open the voice channel and dial the number
◼ Cancelling a call
While calling the number, the user can stop the audio channel by putting back the handset, pressing the
hands-free button or pressing the [End] button to drop the call.
Figure 15 - Call number
8.2 Answering calls
When there is an incoming call, the user will see the following incoming call on the screen.
Figure 16 - Answering calls
The user can answer the call by lifting the handset, pressing the hands-free button, or pressing the [Answer]
button. To reject the incoming call, the user should press the [More] and then the [Reject] button.
8.2.1 Communication
When the call is connected, the user will see a communication mode screen as in the figure below.
Figure 17 - Communication interface
To Next Page
Loading...
