H2 DeskPhone
H2P DeskPhone
8AL90394ENAAed01 79 /111
12 Network >> Basic
This page allows users to configure network connection types and parameters.
12.1 Network >> Service Port
This page provides settings for Web page login protocol, protocol port settings and RTP port.
Figure 112 - Service port settings
Table 17 - Service Port
Reboot to take effect after settings. Optionally, the web page login is
HTTP/HTTPS.
Default as 15 minutes, the timeout will automatically exit the login page,
need to login again.
After the timeout, you do not need to enter a user name and password
because it will automatically login to the web page.
The default is 80. If you want system security, you can set ports other than
80.
Such as :8080, webpage login: HTTP://ip:8080
The default is 443, the same as the HTTP port.
The value range is 1025 to 65535. The RTP port value starts from the initial
value set. For each call, 2 is added to the value of the voice and video port.
To Next Page
Loading...
