H2 DeskPhone
H2P DeskPhone
8AL90394ENAAed01 56 /111
manager does not want others to retrieve this call, the manager can press the Private Hold key.
Scenario 4: The manager is on a call with a customer and requires the secretary to join the call to make
records. The secretary can press the corresponding SCA line key to join this call.
9.8 Message
9.8.1 MWI（Message Waiting Indicator）
If the service of the lines supports a voice message feature when the user is not available to answer the call,
the caller can leave a voice message on the server to the user. The user will receive a voice message
notification from the server, and the device will prompt a voice message waiting icon on the standby screen.
Figure 72 - New voice message notification
Voice message icon
To listen to a voice message, the user must first configure the voicemail number. After the voicemail number
is configured, the user can retrieve the voicemail from the default line.
When the telephone is in default standby status,
⚫ Press to open the voice message configuration interface, and select the line to be configured by
pressing the up/down navigation buttons.
⚫ Press the [Edit] button to edit the voice message number. When finished, press the [OK] button to
save the configuration.
⚫ In the following picture, “1” in front of the line brackets represents unread voice messages, and “4”
represents the total number of voice messages.
Figure 73 - Voice message interface
Figure 74 – Configuring the voicemail number
To Next Page
Loading...
