H2 DeskPhone
H2P DeskPhone
8AL90394ENAAed01 32 /111
8.5 Auto-answering
The user may turn on auto-answering mode on the device, and any incoming call will be automatically
answered. Auto-answering can be enabled on a line basis. The user can start the automatic answering
function in the webpage interface.
The icon in the upper right corner of the screen indicates that auto answering is enabled.
Figure 21 - Auto-answering enabled on the line
⚫ WEB interface:
Log in to the telephone page, enter [Line] >> [SIP], select [Basic settings], check Enable Auto
Answering, and click Apply after setting the Auto Answering Delay time.
Figure 22 - Enable auto-answering in web page
8.6 Callback
The user can dial the number of the last missed call. If there is no call history, press the [Callback] button and
the telephone will say "can't process".
⚫ Set the Callback key through the telephone interface:
Under Standby, long press the line key, enter the [DSSkey] setting interface, select the Dsskey, set type
to Key Event, set key to Callback function, input the callback key name, and press the [ OK ] key to
save.
Figure 23 - Set the Callback key on the telephone
To Next Page
Loading...
