H2 DeskPhone
H2P DeskPhone
8AL90394ENAAed01 92 /111
when dialing. Default is enabled.
Plays DTMF tone on the device when user presses telephone digits during
taking. Default is enabled.
Selects whether DND is to take effect on the line or on the telephone or not.
Enables DND Timer. If enabled, DND is automatically turned on from the
start time to the off time.
When intercom is enabled, the device will accept the incoming call request
with a SIP header of Alert-Info instruction to automatically answer the call
after a specific delay.
Enables Mute mode during the intercom call.
If the incoming call is an intercom call, the telephone plays the intercom
tone.
Enables Intercom Barge. When this is selected,, the telephone auto
answers the intercom call during a call. If the current call is an intercom call,
the telephone will reject the second intercom call.
Sets the SIP response code on call rejection during DND.
Sets the SIP response code when the line is busy.
Sets the SIP response code on call rejection.
Enables Password Dial. When this is selected, if the number entered
begins with the password prefix, the following N numbers after the
password prefix will be hidden as *, N standing for the value which you
enter in the Password Length field. For example, if you set the password
prefix to 3 and enter the password length as 2, when you enter the number
34567, it will display as 3**67 on the telephone.
Configures the encryption number length.
Configures the prefix of the password call number.
Standby power lamp status.. Off is LED off. Open is always bright red. Off
by default.
The status of the power lamp when there is an unread short message/voice
message, including off/on/slow flash/quick flash. Default is slow flash.
The status of the power lamp when there is a missed call, including
To Next Page
Loading...
