OmniSwitch 6465 Hardware Users Guide December 2019 page 1-1
1 OmniSwitch 6465
Refer to the information below for OmniSwitch 6465 models and components.
Model Number Description
OS6465-P6 Fixed-configuration, fanless, din-mountable chassis with:
• 4 - RJ45 10/100/1000Base-T 802.3at PoE ports (Odd-numbered ports
support 60W)
• 2- 100/1000Base-X SFP ports
OS6465-P12 Fixed-configuration, fanless, din-mountable chassis with:
• 8 - RJ45 10/100/1000Base-T 802.3at PoE ports (Odd-numbered ports
support 60W)
• 4- 100/1000Base-X SFP ports
OS6465-P28 Fixed-configuration, fanless, rack-mountable chassis in a 1U form factor with:
• 22 - RJ45 10/100/1000Base-T 802.3at PoE ports (Ports 1 - 8 support 60W)
• 2- 100/1000Base-X SFP ports
• 4- SFP+ 1G/10G ports
OS6465T-12 Fixed-configuration, fanless, din-mountable chassis with:
• 8 - RJ45 10/100/1000Base-T ports
• 2 - 10/100/1000Base-T or 100/1000Base-X Combo ports
• 2- 1000Base-X SFP ports
OS6465T-P12 Fixed-configuration, fanless, din-mountable chassis with:
• 8 - RJ45 10/100/1000Base-T 802.3at PoE ports (Odd-numbered ports
support 60W)
• 2 - 10/100/1000Base-T or 100/1000Base-X Combo ports
• 2- 100/1000Base-X SFP ports
Note: The 'T' models support an increased operating temperature range as documented in the chassis spec-
ifications table, but they do not meet the Industrial Compliance Requirements listed in the Standards
Compliance section.
To Next Page
Loading...
