Alcatel-Lucent OmniSwitch 6465 - Power over Ethernet Budget

Power over Ethernet Budget Managing Power over Ethernet (PoE)
page 4-4 OmniSwitch 6465 Hardware Users Guide December 2019
Power over Ethernet Budget
The following table lists the Power over Ethernet wattages available based on the number and types of power
supplies installed and the ambient temperature.
OmniSwitch 6465-P6/P12 and 6465T-P12 PoE Budget
OmniSwitch 6465-P28 PoE Budget
Viewing Power Supply Status
To view the type and status for installed power supplies, use the show powersupply command:
-> show powersupply
Total PS
Chassis/PS Power Type Status Location
-----------+---------+--------+--------+-----------
1/1 75 AC UNPLUG Internal
Total 75
Ambient
Temperature
OmniSwitch
One (1) or Two (2)
PS-I75AC
One (1) or Two (2)
PS-I185AC-P
Internal P/S
60°C or lower OS6465T-P12
N/A N/A 115W
60°C or lower OS6465-P6
OS6465-P12
45W 150W N/A
Between
60°C to 70°C
OS6465-P6
OS6465-P12
30W 130W N/A
Between
70°C to 75°C
OS6465-P6
OS6465-P12
No PoE Provided No PoE Provided N/A
Ambient
Temperature
OmniSwitch One (1) PS-I180AC-P or PS-I180DC-P
Up to 75°C OS6465-P28
112W (PS-I180AC-P)
112W (PS-I180DC-P @ 48VDC)
72W (PS-I180DC-P @ 24VDC)
Two (2) PS-I180AC-P or PS-I180DC-P
285W (2 x PS-I180AC-P or 2 x PS-I180DC-P @ 48VDC)
205W (2 x PS-I180DC-P @ 24VDC)
205W (1 x PS-I180DC-P @ 24VDC and 1 x PS-I180AC-P)
205W (1 x PS-I180DC-P @ 24VDC and 1 x PS-I180DC-P @ 48VDC)