Chassis and Power Supplies Mounting the Switch
OmniSwitch 6900 Hardware Users Guide June 2020 page 3-35
Airflow Mismatch
If an airflow mismatch is detected at bootup, OK and PS LEDs blink green/amber and the GRN LED
blinks green (see “Chassis Status LEDs” on page 3-24), warnings display, and the switch continuously
reboots until the issue is corrected.
If an airflow mismatch is detected after the switch has fully booted (e.g., when a fan tray or power supply
is hot-inserted) OK and PS LEDs blink amber and the GRN LED blinks green (see “Chassis Status LEDs”
on page 3-24, warnings displayed, switch will reboot when it reaches temperature danger threshold.
Color Coding
To help users avoid mismatched fan trays and power supplies, rear-to-front components are marked with
purple color coding. (Front-to-rear components use standard product colors.)
To Next Page
Loading...
