6
—
Device Management
6.2 — Access Groups 52
6.2.1 — Create an Access Group 52
6.2.2 — Delete an Access Group 53
6.2.3 — Embedded Access Groups 54
6.2.4 — Change Default Access Group 55
6.2.5 — Add Additional Access Groups 56
6.3 — Security Events 57
6.3.1 — Viewing Security Events 57
6.3.2 — Security Events Summar y Table 58
6.4 — Generate QR Code 60
6.4.1 — Ser ver Location 62
6.4.2 — Generate and Download QR Code 63
6.4.3 — Present QR Code to the Rock’s Camera 64
6.4.4 — When can the Rock read a QR code? 64
6.5 — Profiles 65
6.5.1 — Viewing Profiles 66
6.5.2 — Delete a Profile – Option 1 (delete through Profiles) 68
6.5.3 — Delete a Profile – Option 2 (delete through Security Event) 69
6.5.4 — Managing Access 70
6.5.5 — Troubleshooting Tips 72
6.1 — Devices 28
6.1.1 — Configure Rock Mode of Operation 29
6.1.1.1 — Mode Setting – Demo 31
6.1.1.2 — Mode Setting – 1FA 31
6.1.1.3 — Mode Setting – 1FAF 32
6.1.1.4 — Mode Setting – 2FA-M 32
6.1.1.6 — Mode Setting – 2FA 33
6.1.1.5 — Operating in 3FA 33
6.1.1.7 — Mode Setting – Enrollment 34
6.1.1.8 — Changing Badges 35
6.1.2 — LED Control 36
6.1.3 — ONVIF 38
6.1.3.1 — Adding a Rock to the VMS 40
6.1.4 — HOLD Signal Detection 40
6.1.5 — Configure ACS Aler ts 42
6.1.6 — Configure OSDP 45
6.1.6.1 — Select Rock to Configure OSDP 46
6.1.6.2 — Rock Communication with Badge Reader 48
6.1.6.3 — Rock Communication with ACS 49
6.1.6.4 — Changing from Secure to Unsecure Channel 50
6.1.6.5 — Troubleshooting Tips 51
6.1.6.6 — Wiring Details 51
To Next Page
Loading...
