Alderon Industries™ - Leading Edge Control Products | 23
Mini Power Post™ Monitoring System - USER GUIDE
1.1 | RESETTABLE HISTORY - Pump Run Stats
From the PUMP RUN STATS screen, press right arrow key to
access the menu for event statistics and then press down arrow
key for the available stats within this menu.
i. Pump Run Amps (last event)
ii. Pump Run Average Amps
iii. Pump Run Maximum Amps
iv. Pump Run Minimum Amps
v. Pump Run (last event)
vi. Pump Run Average
vii. Pump Run Maximum
viii. Pump Run Minimum
ix. Pump Run Elapsed Time
x. Pump Run Event Counter
xi. Pump Run Total Gallons Pumped
xii. Clear History?
Note: The down arrow key will cycle through all the pump run
stats. The gallons per minute (GPM) setting must be greater than
the factory setting of zero or the total gallons pumped statistic
will not be displayed. Press MENU when CLEAR HISTORY?
text is displayed on the screen, which will reset all pump run
stats and RESETBLE Saved will appear on the screen. Press
the left arrow key to exit to the main resettable history events
menu. Press the test pushbutton to exit the menu system.
Resettable History Statistics
OR
To Next Page
Loading...
Need help?
General
