Alderon Industries™ - Leading Edge Control Products | 27
Mini Power Post™ Monitoring System - USER GUIDE
3.1 | LIFETIME HISTORY - Pump Run Stats
From the Pump Run Stats screen, press right arrow key to
access the menu for event statistics and then press down arrow
key for the available stats within this menu.
i. Pump Run Amps (last event)
ii. Pump Run Average Amps
iii. Pump Run Maximum Amps
iv. Pump Run Minimum Amps
v. Pump Run (last event)
vi. Pump Run Average
vii. Pump Run Maximum
viii. Pump Run Minimum
ix. Pump Run Elapsed Time
x. Pump Run Event Counter
xi. Pump Run Total Gallons Pumped
Note: The down arrow key will cycle through all the pump run
stats. The gallons per minute (GPM) setting must be greater
than the factory setting of zero or the total gallons pumped
statistic will not be displayed. Press the left arrow key to exit to
the main lifetime history events menu. Press the test pushbutton
to exit the menu system.
Lifetime History Statistics
To Next Page
Loading...
Need help?
General
