12 Electronic Door Fittings of the PegaSys Series
Preparations for installation: Tools
1. Required tools
Cordless screw driver / hand drill
Flat-bladed screw driver
Phillips screw driver
Torx screw driver
Drill, 7 mm
Square hole
(from left)
2. Optional tools
Drilling template, long plate (Germany)
Drilling template, long plate (France)
Drilling template, short plate, rose fitting
Mounting cylinder
Flexible square hole, 3 mm (available from
specialized retailers)
Flexible Torx screw driver with
cover plate lifter
(from left)
3. Mounting block and Toolkit
To Next Page
Loading...
Need help?
General
