Rockwell Automation Publication 1444-UM001D-EN-P - June 2018 123
Chapter 4
Measurement Definition
The Input data page within Module Definition allows selection of
measurements for inclusion in the controller input assembly. However, while
that reserves a spot in the table, it doesn't define how the measurements must
be calculated. You can define the measurements in the group of pages under
Module Definition, including filters, overall, tracking filters, gSE, bands, DC,
and demand.
Topic Page
Filters 124
Overall 132
Tracking Filters 132
FFT 144
gSE 148
Bands 150
DC 155
Demand 189
To Next Page
Loading...