Rockwell Automation Publication 1444-UM001D-EN-P - June 2018 15
About the Dynamix 1444 Series Dynamic Measurement Module Chapter 1
• Over 20 different measurement parameters per measurement channel,
such as RMS, peak, FFT band RMS, order magnitudes, phase, and
speed
•On-board storage of:
– Trend data (discrete and dynamic data records)
– Alarm/Event data (discrete and dynamic data records)
– Transient data (discrete and dynamic data records)
• Expansion modules available to enhance system capabilities:
– 4-channel Relay output module (up to three per each DYN module)
– 2-channel Tacho Signal Conditioning module
– 4-channel 4…20 mA output module
Product Description/System
Overview
The Dynamix series consists of six core part numbers and various accessories
for connectors and cables.
A minimum Dynamix 1444 Series monitoring system consists of the
following:
• One DYN module, which is composed of a terminal base, a module, and
either spring or screw clamp removable plug connectors for both the
module and terminal base.
• Appropriate enclosure
•Sensors
•Power supply unit
Expansion modules provide enhanced or optional I/O capabilities that are
application-dependent:
• 4-channel relay output modules (RELX)
• 4-channel 4…20 mA output module (AOFX)
• 2-channel Tacho Signal Conditioning module (TSCX)
Up to three RELX modules and one each AOFX and TSCX module can be
connected to one DYN module. Interconnections between a DYN module
and its expansion module (and to extend the tacho bus from one such group to
further DYN modules) are by ribbon cable assembly.
To Next Page
Loading...
Need help?
General